Wrap it once.Never paint it again.
Aluminum trim wrap, siding, soffit & fascia, seamless gutters and decks for Macomb County and Metro Detroit, measured on your house and bent on site by the crew that hangs it.
Rot to right.
Same corner.
That dark, peeling corner under your gutter usually isn’t paint. It’s rotted fascia. Here’s how we take it back to solid wood and wrap it in aluminum that doesn’t rot again.
- Rot out
- Measure
- Mark
- Cut
- Bend
- Wrap
- Gutter on
- Done
Dramatized story ad.
Every exposed edge of your house, covered.
Michigan weather gets into wood at the edges: window and door surrounds, brick mould, fascia boards, gable trim, porch columns. We cap those edges in custom-bent aluminum, replace what's past saving, and make the whole exterior match. Sterling Heights, Shelby Township, Macomb Township, Clinton Township, Warren and across the 586.
Aluminum trim wrap & window capping
Window and door surrounds, brick mould, garage-door openings, fascia boards, gable peaks and porch columns capped in .019" aluminum coil, measured on your house and bent on our sheet-metal brake in the driveway. Hemmed edges, tight mitered corners, sealed seams, no more painting.
Custom sheet metal
Bay-window caps, drip edge, chimney flashing, odd angles the big-box stuff doesn't fit. If it can be drawn, it can be bent.
Vinyl siding repair & replacement
Full re-sides or a repair matched to what's already on the house, with house wrap, J-channel and corner posts done right so it stays flat and dry.
Soffit & fascia repair and wrap
Rotted fascia boards replaced, vented aluminum soffit that lets the attic breathe, and fascia wrap along the whole roofline that ends the peeling-paint cycle for good.
Seamless gutters & gutter guards
Seamless aluminum K-style gutters in 5-inch and 6-inch, 3x4 downspouts sized for the roof, pitched to drain, with micro-mesh gutter guards if you're done cleaning them.
Deck building & railings
New builds and rebuilds in composite or treated lumber, with aluminum railing that matches the rest of the exterior.
Garage door trim wrap
The most-hit, most-rotted trim on the house. Wrapped clean with mitered corners so it looks new every time the door goes up.
The last time you'll ever deal with that trim.
- Seals the woodAluminum caps the frame so freeze-thaw water, snow load and sun can't get at it. What's underneath stops rotting.
- Ends the painting cycleBaked-on factory finish. No scraping, no priming, no ladder every third summer.
- Fitted to your house, not a catalogEvery piece is measured on the wall and bent on site, so corners are tight and lines stay straight.
- Colors that matchCoil stock comes in dozens of factory colors, so wrapped trim matches new or existing siding and gutters.
Sheet metal since before the business had a name.
Tyler Rambow has done aluminum and sheet-metal work pretty much his whole life, starting hands-on in his dad's shop building prototype steel car parts. Rambow Exteriors is that trade pointed at houses: measured on your wall, bent on site, fitted tight.
It's a two-man crew, Tyler and one other guy, so the person you talk to is the person doing the work.
“Quality installation. Unmatched dedication.”Off the side of the Rambow trailer
- Macomb County based, Metro Detroit served
- Two-man crew, owner on every job
- Licensed and insured in Michigan
- Works Michigan winters: trim wrap, siding, soffit and fascia, weather permitting
“Don’t need a warranty if it’s done right the first time. Call if you need help.”Tyler Rambow
This is where the magic happens.
Your aluminum trim, fascia and soffit pieces get measured on your wall, then cut and bent on site, right here on the trailer. Take the tour.
Homes, storefronts and shop buildings.
Commercial fascia and trim wrap, industrial post wrap, custom-bent sheet metal for buildings: same crew, same brake, same standards. The difference is the size of the job and who signs the paperwork.
Residential
Ranches, colonials, bungalows and everything in Macomb County's subdivisions. Repairs, full exteriors and the trim wrap that ends the maintenance.
- Trim wrap, soffit, fascia
- Siding repair and replacement
- Seamless gutters and guards
- Decks and railings
Commercial
Storefronts, offices, multi-unit and rental property. Clean exteriors, scheduled around your hours, with a single point of contact.
- Fascia, soffit and parapet wrap
- Gutter and downspout systems
- Siding and panel work
- Custom flashing and caps
Industrial
Shops, warehouses and pole buildings where water intrusion costs real money. Metal panel siding, trim and drainage that hold up to the traffic.
- Metal panel siding and trim
- Large-run gutters and downspouts
- Custom sheet-metal fabrication
- Repairs after storm and impact damage
Four steps. No pressure at any of them.
Call or text
Tell us what's peeling, leaking or rotting. Photos help. You'll talk to the person who does the work.
Free on-site estimate
We measure everything on the house and walk you through options and colors. You get a written price, not a range.
Bend and install
Material is cut and bent on site to your measurements. Old trim comes off, rot gets dealt with, new goes on.
Walk-through
We walk the job with you, clean up every scrap of metal, and you don't pay the balance until you're happy.
Macomb County first. Metro Detroit next.
Based in the 586: trim wrap, siding, soffit & fascia and seamless gutters for Sterling Heights, Shelby Township, Macomb Township, Clinton Township, Warren and the rest of Macomb County, reaching into Oakland and St. Clair counties. Not sure if we reach you? Text the address and we'll tell you straight.
Listed cities are the core service area; jobs outside it are quoted case by case.
Your Google reviews, live on your site.
Once the site is connected to the Rambow Exteriors Google Business Profile, new five-star reviews land here automatically. The three cards below are placeholders showing the layout.
"Real customer words go here, pulled straight from Google the day they're posted."
"Real customer words go here, pulled straight from Google the day they're posted."
"Real customer words go here, pulled straight from Google the day they're posted."
No made-up reviews, ever. The layout is built; the words come from real customers.
Straight answers before you call.
What is aluminum trim wrap, exactly?
It's a thin sheet of painted aluminum (coil stock) that's measured on your house, bent to shape on a brake, and fastened over the wood trim around windows, doors, garage openings, fascia and posts. It seals the wood from weather and gives you a finish you never repaint.
Can you wrap trim that's already rotted?
Sometimes. Soft or crumbling wood gets replaced first, then wrapped. Wrapping over rot just hides it, and we won't do that. You'll know before we start which pieces need replacing.
Will the colors match my siding and gutters?
Coil stock comes in dozens of factory colors that line up with the common siding and gutter lines, so a wrapped window or fascia reads as one clean exterior. We bring color samples to the estimate.
5-inch or 6-inch gutters?
Both are standard seamless K-style sizes. Five-inch handles most Macomb County roofs; six-inch with 3x4 downspouts is for bigger roof planes or steep pitches that dump water fast. We size it on the house at the estimate, not from a price sheet.
Do you do small repairs or only whole houses?
Both. A single garage-door wrap, a section of fascia, a downspout that's pulled away: all fine. The estimate is free either way.
Do you work on commercial buildings?
Yes. Storefronts, offices, rentals, shops and warehouses. Scheduling around your business hours is part of the quote.
How do I get a price?
Call or text 586-601-6401, or use the form below. We'll set a time to measure on site and you'll get a written price for the exact work, not a ballpark.